보건복지부 지정 첨단재생의료 실시기관
Saeron Clinic Magazine English Blog

Stem Cell Injection Costs: What Should You Compare?

Hello. I’m Dr. Joo Yong-min, director of Saeron Clinic, a designated advanced regenerative medicine facility. “Why is there such a gap in stem cell injection prices?” “Is it all right to go somewhere cheaper?” “Is it really that expensive?” These are the questions I hear most from people who paused while researching a procedure because of the cost. Even under the same name of stem cells, the costs people are quoted vary quite a bit, so many put off deciding because they can’t tell what the difference is. Let me give you the conclusion first: the essence of the price gap is “which cells, and how many.” Today I’ll walk you through how much is an appropriate dose, by material and by treatment area.

Stem cell injection prices differ for three reasons. First, the material differs. PRP obtained from blood is not a stem cell product but a concentrate of growth factors, so the process is simple and the cost is lower; BMAC from bone marrow contains mesenchymal stem cells together with growth factors and sits in the middle; SVF from fat has the highest cell count and the most complex processing, so it tends to cost the most. Second, even for the same procedure, prices differ when the harvest volume and cell count differ. Third, operating structure plays a part, such as whether cell separation is done in-house. So the amount alone doesn’t tell you much; it’s more accurate to compare on the basis of “dose and cell count.”

Key takeaways

  1. “Blood stem cells” is not an accurate term. What’s drawn from blood is PRP (platelet concentrate), and it’s cheaper because the process is simple, not because it doesn’t work.
  2. What divides the price is whether mesenchymal stem cells (MSCs) are included, and how many. Bone marrow BMAC and then fat-derived SVF involve more complex preparation and higher costs.
  3. The basis for comparison isn’t the price list but “how many cc are drawn and how many cc are injected” and “how many cells go in.” Be sure to ask about both at your consultation.

Why do stem cell injection prices vary so much?

To understand the price gap you first have to know the material and the mechanism. There are broadly three materials used in regenerative treatment. PRP (platelet-rich plasma) from blood has the simplest process and the lowest cost. BMAC (bone marrow aspirate concentrate) from bone marrow contains stem cells together with growth factors and sits in the middle, while SVF (stromal vascular fraction) from fat has the highest cell count and the most complex processing, so it tends to cost the most.

One term needs care. You’ll often come across the phrase “blood stem cells,” but strictly speaking these are not stem cells. What’s drawn from blood is PRP: platelets and growth factors concentrated to a high density. The names are easy to mix up, so it helps to ask which material is being used at your consultation. PRP is cheap because of its simple structure — a blood draw, a straightforward centrifugation, and the procedure the same day — not because it doesn’t work. If it fits your treatment goal, it’s a reasonable choice.

A photograph marking centrifuged blood separated into plasma, buffy coat and red cell layers
What’s obtained from blood isn’t stem cells — it’s PRP, a concentrate of platelets and growth factors.

Two further factors drive the price gap. One is cell count (dose). Even for the same SVF procedure, injecting 100 million cells and injecting 300 million naturally cost different amounts. The other is the clinic’s operating structure. Whether cell separation is done in-house or outsourced changes the base cost, and running costs such as rent are reflected in the price to some extent too.

The amount alone doesn’t tell you whether a treatment is good or not. Compare on the basis of dose and cell count.

What makes higher-priced stem cell treatment different?

What divides the price is whether mesenchymal stem cells (MSCs) are included. The more MSCs are involved, the more complex the treatment structure becomes, and preparation and technical difficulty rise with it, pushing the cost up. Bone marrow-derived BMAC concentrates cells extracted from marrow and contains MSCs together with a range of growth factors, so it’s used for inflammation control and improving the tissue recovery environment, and applied to flushing or chronically inflamed skin and to advanced hair loss.

Fat-derived SVF is not a simple cell injection. The adipose tissue plays a structural supporting role, stem cells and growth factors are secreted continuously, and combining it with microfat grafting raises the survival rate. Because it looks at the tissue environment as a whole, it focuses on maintaining and restoring the tissue rather than simple volume improvement. There are two processing methods: enzymatic processing, which secures a high cell count, and mechanical processing, which also makes use of the extracellular matrix (ECM) layer and microfat. How bone marrow and fat differ and when to choose each is covered in detail in a piece comparing SVF and BMAC.

An infographic comparing bone marrow tissue and adipose tissue on a balance scale
Bone marrow and fat aren’t better or worse — they’re materials chosen by purpose. Price follows that structure.

How much is an appropriate dose by area?

These are the appropriate doses I use as a reference in practice across three areas. Comparing these numbers with what you’re told at a consultation makes the decision much easier.

Area Procedure Appropriate dose standard
Face, hair loss PRP At least 60 cc blood drawn, 5-7 cc concentrated PRP
Bone marrow BMAC At least 60 cc marrow drawn, 5-7 cc concentrate
Fat-derived SVF 60 cc pure fat
Knee osteoarthritis PRP (early stage) 30 cc blood per knee, 3-5 cc concentrated PRP
Bone marrow BMAC (mid stage) 60 cc marrow per knee, 5-6 cc concentrate
Fat-derived SVF (mid-to-late stage) 60 cc pure fat, enzymatic processing, 50 million+ cells
Anti-aging IV PRP IV 240 cc blood (120 cc if elderly or slight of build)
BMAC IV 120 cc marrow and 120 cc blood processed together
SVF IV 120 cc pure fat, enzymatic processing, 100-120 million cells
60 ccminimum blood draw for face and hair loss PRP — less than this leaves too little active material
Jul 2023bone marrow BMAC recognized as a new health technology for knee osteoarthritis
100 millionreference cell count for SVF IV, the largest single driver of cost differences

For knee osteoarthritis the recommended procedure differs by stage: PRP is mainly considered early, bone marrow BMAC mid-stage, and fat-derived SVF mid-to-late. Bone marrow BMAC was recognized as a new health technology for knee osteoarthritis in July 2023. The per-session cost and effect of knee PRP is in a piece on the effect and cost of knee PRP injections, and the difference between the three procedures in a piece comparing three knee stem cell injections.

Is it all right to have a cheap stem cell procedure?

The answer to this is clear: “it depends what treatment you’re having.” If the goal is supplementing growth factors — skin vitality, mild regeneration, early hair loss, early arthritis — then the comparatively affordable PRP is a viable choice, because the structure is simple and same-day treatment is possible. If, on the other hand, you’re hoping for tissue regeneration, structural improvement, and long-term change, BMAC or SVF, which include MSCs, may also be worth considering.

What’s worth looking at more closely is the dose, rather than the price. If too little blood is drawn, there’s correspondingly less active material. At your consultation, it’s worth asking “how many cc of blood, and how many cc of PRP injected.” In the end, what matters more than price is whether the composition and purpose of the treatment fit your condition right now.

In the clinic

To people who say the spread in stem cell injection prices frightens them, I show a dose table rather than a price list. When someone has been to two clinics for consultations on the same-named procedure and I ask “how many cc did they say they’d draw, and how many cells did they say they’d put in,” many don’t remember. Once you know those two numbers, comparing becomes much easier. Our own clinic’s actual costs are published with the dose standards in our non-covered treatment cost guide.

Quote-ready unitStem cell procedures with the same name are not the same treatment. Check two things — what goes in, and how much — and you’ll come closer to the result you expected.

WhyPRP is a growth factor concentrate, BMAC has MSCs plus growth factors, SVF is the mixture with the highest cell count — the materials themselves differ, and even with the same material the price moves with cell count.
ExampleWe regard 5-7 cc from 60 cc of blood as appropriate for facial PRP, and 3-5 cc from 30 cc for knee PRP.
Caution“Blood stem cells” is not an accurate name. Check which material the procedure uses first.

What should you check before price?

Whether the treatment fits your condition comes first. For early ageing, mild skin improvement and early hair loss, PRP may be considered; for problem skin such as flushing or seborrhoeic dermatitis and for advanced hair loss, BMAC; for loss of elasticity, advanced ageing and hair loss that responds poorly, SVF. For knees, the KL grade confirmed on X-ray is also taken into account. Which procedure suits you is something we decide together after an examination. Anti-aging IVs divide into PRP IV, BMAC IV and SVF IV according to whether the goal is light condition management or active anti-ageing.

After that comes dose and cell count, and the conditions of the facility. Check whether it is a designated advanced regenerative medicine facility, whether cell separation is done in its own facility, and whether the consultation explains harvest volume and cell count in numbers. How intravenous therapy acts on the whole body is explained in a piece on anti-aging injections and stem cell IV therapy, and why results differ between people in a piece on why stem cell procedure results vary.

Before comparing stem cell injection prices

1. Check the name
2. Check the dose
3. Check the facility
Frequently asked questions

How much does a stem cell injection cost?
It varies quite a bit with the material, the area and the number of cells. That makes it hard to compare on a single figure; it’s more accurate to line things up on the same dose basis. Our clinic’s costs are published with the dose standards in our non-covered treatment cost guide, so please feel free to take a look.
What is a “blood stem cell” injection?
It isn’t an accurate name. What’s drawn from blood is PRP — concentrated platelets and growth factors — and it is not a stem cell product. The names are easy to mix up, so check which material is being used first.
Is it all right to have a cheap stem cell procedure?
If the goal is supplementing growth factors, the comparatively affordable PRP is reasonable. If the goal is tissue regeneration and long-term change, BMAC or SVF, which include MSCs, may also be worth considering. Either way, it’s worth checking the dose, such as how much blood is drawn and how much is injected, before the price.
What should price comparison be based on?
On “how many cc of blood, marrow or fat are harvested and how many cc injected,” and “how many cells go in.” Comparing on the basis of dose and cell count is much more accurate. It’s worth asking for these numbers at your consultation.
Key terms
PRP (platelet-rich plasma)
Def.A preparation made by centrifuging the patient’s own blood to concentrate platelets and growth factors; it is not a stem cell product.
PlainCalling it a “blood stem cell” is simply wrong.
BMAC (bone marrow aspirate concentrate)
Def.Concentrated marrow harvested from the pelvic bone, containing mesenchymal stem cells together with growth factors.
PlainA mid-priced material that sends both the signal and the workers.
SVF (stromal vascular fraction)
Def.A mixture of cells separated from adipose tissue containing stem cells and endothelial progenitor cells, with the highest cell count.
PlainCell count is price, which is why the spread here is the widest.
Enzymatic and mechanical processing
Def.The two ways of obtaining SVF from fat — enzymatic secures a high cell count, mechanical also makes use of the extracellular matrix and microfat.
PlainThe difference between extracting many cells and keeping the tissue whole.

This post is medical advertising intended to provide medical information and complies with Article 56(1) of the Korean Medical Service Act. Effects and side effects may vary with individual constitution and health status, so please decide on treatment after a thorough consultation with a medical professional.

THE SAERON STORY

Dr. Yong-min Joo · Emergency Medicine Specialist

With over 15 years on the frontlines of emergency medicine and approximately 150,000 patients treated, Dr. Joo focuses exclusively on stem cell and regenerative medicine. As a Ministry of Health & Welfare–designated institution, he personally oversees every step from diagnosis to treatment and aftercare.

15+yrs in Emergency Med.
150K+patients treated
100%appointment only